Many people want to modify their cars to improve their performance, and there are lots of modification options for them. Some important steps you can take to improve the performance of your car include maximizing the efficiency of the air and exhaust flow by replacing suspension components to improve the working. Eventually, you may want to consider adding a form of forced induction or even nitrous.

Ultimately, modifying your car is all about making it your own according to your comfort, so choose your modifications based on your driving style, interests, and vehicle.

Make adjustments to maximize fuel economy and power.

Modifying your car to increase its performance can do you very little good if you fail to keep the top of the required maintenance that helps keeps your car running smoothly. You can make your vehicle perform better and last much longer by changing your oil regularly, ensuring your tires are inflated, and following the recommended schedule of service for your vehicle.

Some cars may require chain adjustments or timing belt or fluid changes at specific mileage to ensure the vehicle continues to run as it was designed. Ensure your tires are properly inflated to their recommended pressure to improve fuel economy and extend the life of the tire.

Install a cold air intake.

Think of your car as an athlete who is running in a race the intake on your car is the way it breathes in as it runs. Stock intakes are designed for a number of purposes that include things like reducing engine noise.

You will not only increase horsepower by replacing your stock intake pipe with one that was designed to maximize power, but you can also maximize fuel efficiency as well.

Cold air intakes often have a larger diameter than the stock pipe and are designed to take the most direct route to the throttle body as possible. Cold air intakes usually include an aftermarket air filter which increases the filter surface. This allows for more air to travel through it at a higher volume.

Some cold air intakes even include heat shielding to prevent the engine temperature from warming the air as it travels into the engine. The cooler the air, the denser it is with oxygen, allowing for a hotter burn which creates more horsepower.

Get rid of your junk car today: Old Car Removals Melbourne

Replace shocks and springs with higher performance alternatives.

The shocks and springs in the suspension of your car were designed and built with your comfort in mind. In order to maximize your comfort, the suspension allows the wheels to move up and down to limit the body of the car is affected by bumps.

Replacing these components with stiffer shocks and springs will compromise some of your ride comforts, but the added stiffness will keep the tires in contact with the road better, thus improving traction when accelerating, braking, or turning.

Coil Overs are adjustable shocks and springs that allow you to lower the vehicle and stiffen the ride based on your driving style and preference. Many stiffer suspensions also lower the vehicle, which lowers its center of gravity and also air filters.

Swap rubber bushings with polyurethane.

Your suspension has a number of bushings that separate moving metal parts while reducing vibrations and helping to maintain your car’s weight distribution. Unfortunately, the rubber these bushings are made of tends to break down over time. Polyurethane replacement bushings are much stiffer than their rubber counterparts and won’t wear down as easily as the way stock ones will.

Polyurethane bushings will make loud squeaking noises if not properly greased when installed. Bushings can be replaced one by one or kits can be purchased to replace all of your bushings at once. Some bushings may require the use of a press to remove from their housings.